BlogCompliancePayroll Statutory Compliance India: Labour Code Changes

Payroll Statutory Compliance India: Labour Code Changes

Table of Contents hide

Summary

Running payroll in India in 2026 means working through a very different compliance framework from the one employers used only a year ago.

The four labour codes came into force from 21 November 2025, consolidating 29 Central labour laws into the Code on Wages, 2019, Code on Social Security, 2020, Industrial Relations Code, 2020 and Occupational Safety, Health and Working Conditions Code, 2020.

The Central Government then notified major final rules, including the Code on Wages (Central) Rules, 2026, Social Security (Central) Rules, 2026 and Occupational Safety, Health and Working Conditions (Central) Rules, 2026 on 8 May 2026.

Payroll also moved to the Income-tax Act, 2025 from 1 April 2026, and the statutory EPFO wage ceiling was increased from ₹15,000 to ₹25,000 from 17 September 2026.

That does not mean every employer now follows one identical national checklist.

State minimum wages, Shops and Establishments requirements, professional tax, Labour Welfare Fund, holidays, working conditions and several other rules still depend on location and the appropriate Government.

The first step in compliance is therefore not filing a return.

It is knowing which rules apply to which part of your workforce.

What changed in 2025 and 2026?

Area Position in September 2026
Four labour codes In force from 21 November 2025
Statutory wage definition Common labour-code definition applies
50% wage rule Excess specified exclusions above 50% are added back into wages
Minimum wages Code applies across employments, but applicable rates remain notification and jurisdiction specific
EPFO ceiling Increased to ₹25,000 from 17 September 2026
ESI ceiling ₹21,000 continues, tested on Code-defined wages (50% rule), not gross
Fixed-term gratuity Eligible after one year under the contract
Salary TDS Income-tax Act, 2025 applies from 1 April 2026
Form 12BB Replaced by Form 124 for Tax Year 2026-27
Form 24Q Replaced by Form 138
Form 16 Form 130 for salary governed by the 2025 Act
DPDP Phased commencement. Most operational employer obligations are not yet in force as of September 2026
POSH Continues separately from the labour codes
State payroll compliance PT, LWF, local establishment rules and other State requirements remain relevant

This distinction between Central framework and actual employer applicability runs through almost every compliance area.

Start by mapping the establishment before mapping the law

A statutory compliance checklist should begin with a few basic facts about the organisation:

  • legal entity and industry

  • each State and Union Territory in which employees work

  • whether the Central or State Government is the appropriate Government for a particular requirement

  • total employees and workers

  • contract labour headcount

  • fixed-term employees

  • factories or other regulated establishments

  • employee wage bands

  • women employees and shift patterns

  • interstate migrant workers

  • establishments with 10, 20, 50, 100, 300 or other relevant headcount thresholds

A company with an office in Mumbai and another in Bengaluru cannot assume that every payroll rule outside the Central codes is identical.

Nor should a corporate office, factory, mine, construction site and staffing operation be run from one generic statutory profile.

Interactive tool

Employer statutory compliance applicability checker

Enter your headcount and workforce profile to see which Central and State compliance areas apply and which need verification.

Try an example
Get compliance support
A starting point, not a compliance opinion.This uses the common Central headcount and wage thresholds. State laws, notifications, the nature of the establishment and the appropriate Government can change the answer, so verify each area before relying on it.

Wage compliance is now the starting point for payroll

The Code on Wages brought minimum wages, payment of wages, statutory bonus and equal-remuneration principles into one framework.

One of the most important changes is the common definition of wages.

Broadly, wages include Basic pay, Dearness Allowance and retaining allowance. Several components, including HRA, overtime, commission, certain employer contributions and other specified payments, may be excluded.

But those exclusions cannot be increased without limit.

Where the specified exclusions exceed 50% of remuneration, the excess is added back into statutory wages. The Ministry of Labour has confirmed that the wage definition has applied from 21 November 2025.

The 50% rule: why Basic at 50% is the safest structure

This remains one of the most common payroll mistakes.

The law does not fix Basic at exactly 50% of CTC. It adds back excluded components above 50% of the monthly remuneration. Fixing Basic (with DA) at 50% of that remuneration means no add-back is ever triggered, so PF, gratuity and other wage-linked deductions stay constant every month. That is why QuikChex recommends it as the safest structure.

Instead, it tests how much remuneration has been placed into specified excluded components.

If those exclusions exceed the statutory 50% threshold, the excess comes back into wages.

An employer may therefore have Basic below 50% and still arrive at a compliant wage calculation after applying the statutory definition, but the add-back then changes the statutory wage every month. Basic at 50% avoids that.

Conversely, a payroll system that merely forces Basic to 50% of headline CTC may still produce the wrong answer because CTC and the relevant statutory remuneration base are not necessarily the same thing.

Minimum wages now apply across employments

The old scheduled-employment model was removed under the Code on Wages. Minimum-wage protection now extends across employment categories rather than depending on whether the job appears in an old schedule.

That does not create one minimum wage for every employee in India.

The Central and State Governments remain responsible for fixing minimum wages within their respective jurisdictions, and applicable rates can differ according to factors such as skill level, geography and employment category.

A multi-state payroll setup therefore needs a minimum-wage mapping table, not one national figure hardcoded into payroll.

Salary payment deadlines changed for all employees

Monthly wages must generally be paid before the seventh day of the succeeding month.

Where an employee is removed, dismissed, retrenched, resigns or becomes unemployed because of closure, wages payable must ordinarily be paid within two working days.

The wording matters.

This is often described as a "48-hour full-and-final settlement rule", but that is too broad.

The Code specifically addresses wages payable.

Gratuity, statutory bonus, leave encashment or another separation benefit may be governed by separate provisions and timelines.

An employer should therefore split the F&F process into:

wages due on separation, which are subject to the Code on Wages deadline,

and

other terminal benefits, which must follow their own applicable legal timeline.

That is particularly important for payroll systems that currently hold the entire F&F payment until gratuity, asset clearance or expense approvals are complete.

Deductions and wage records also need review

The Code caps total authorised deductions from wages at 50%.

Employers must also maintain the prescribed employee, wage, overtime, advance, fine, deduction and attendance records. The Central Wage Rules allow prescribed records to be maintained electronically or physically.

So the shift towards digital compliance does not mean that every physical register has simply become illegal or disappeared.

The correct requirement depends on the relevant rule and appropriate Government.

Statutory bonus still needs a separate annual calculation

Statutory bonus now sits inside Chapter IV of the Code on Wages rather than the repealed Payment of Bonus Act.

For establishments for which the Central Government is the appropriate Government, the current notified eligibility ceiling is ₹21,000 per month and the calculation threshold is ₹7,000 or the applicable Central minimum wage, whichever is higher.

Eligible employees must normally have worked at least 30 days in the accounting year.

Minimum bonus remains 8 1/3% and the maximum is 20%, subject to the allocable-surplus and set-on/set-off mechanism.

The employer should not simply apply 8.33% of Basic salary across the workforce.

EPFO changed again in September 2026

One of the most immediate payroll changes is the new EPFO wage ceiling.

From 17 September 2026, the statutory wage ceiling for mandatory EPFO coverage increased from ₹15,000 to ₹25,000 per month.

Employees who had remained outside mandatory coverage solely because their wages exceeded ₹15,000 can now fall within mandatory coverage where their wages do not exceed ₹25,000 and the other applicable conditions are met.

For contributions previously restricted to the wage ceiling, the revised ceiling is ₹25,000 or actual applicable wages, whichever is lower. The maximum EPS contribution, where applicable, is correspondingly calculated using the revised ceiling.

Employers should have updated:

  • eligibility logic

  • employee and employer contribution calculations

  • EPS allocation

  • EDLI calculations where relevant

  • ECR preparation

  • CTC cost assumptions

  • new-joiner onboarding rules

This is not merely an HR policy change. It affects payroll cost and employee take-home.

Do not apply the new EPF ceiling to ESI

ESI remains a separate social-security calculation.

The Ministry's 2026 labour-code FAQ states that the existing ₹21,000 per month ESI coverage ceiling continues to apply at present.

Under the labour codes, ESI coverage and contribution are worked out on wages as defined in the Code (with the 50% inclusion rule), not on traditional gross salary.

ESIC currently publishes contribution rates of:

  • employer: 3.25%

  • employee: 0.75%

Contributions are ordinarily due within 15 days after the end of the month in which the wages fall due.

Payroll should therefore maintain separate EPF and ESI eligibility logic.

Gratuity requires a new wage base and a separate FTE check

For regular employees, the normal five-year continuous-service requirement continues subject to the statutory exceptions.

Fixed-term employees are different.

The Ministry has clarified that a directly engaged fixed-term employee becomes eligible for gratuity after one year of service under the contract.

A contract worker supplied by a contractor should not automatically be classified as a fixed-term employee of the principal employer. The Ministry has expressly clarified that fixed-term employment refers to employees directly engaged by the employer.

That distinction is particularly important for staffing companies and their clients.

The wage definition used for gratuity has also applied under the new Code framework from 21 November 2025.

Maternity compliance changed in one important area in 2026

The core maternity-benefit framework continues, including up to 26 weeks for an eligible woman in the circumstances prescribed by the Code.

Establishments covered by the maternity chapter with 50 employees are also subject to the statutory crèche framework, which includes four permitted visits in a day.

An important 2026 change concerns adoptive mothers.

On 17 March 2026, the Supreme Court in Hamsaanandini Nanduri v. Union of India struck down the restriction that confined 12 weeks of adoption-related maternity benefit to women adopting a child below three months old.

The Court held that a woman who legally adopts a child is entitled to the 12-week benefit from the date of handover regardless of the child's age.

Employers should update maternity policies that still contain the three-month age condition.

Work from home after maternity benefit is not an unconditional employee entitlement in every role. The Code permits it where the nature of work allows and where the employer and woman mutually agree on the period and conditions.

Contract labour compliance now starts at a higher Central threshold

Under the Occupational Safety, Health and Working Conditions Code, the contract-labour part generally applies to an establishment that employed 50 or more contract labour on any day in the preceding 12 months and to manpower-supply contractors meeting the same threshold.

That is higher than the 20-worker threshold many employers remember from the old Contract Labour Act.

It does not mean contract workers below that threshold have no employment rights or payroll obligations.

PF, ESI, minimum wages, wage-payment duties, principal-employer exposure and other requirements may still apply independently.

A principal employer should therefore maintain contractor compliance evidence covering at least:

  • worker master data

  • wage payment

  • PF and ESI contribution proof

  • statutory bonus where applicable

  • attendance

  • applicable minimum wage

  • contractor registration/licensing requirements

  • invoices and payroll reconciliation

The correct question is not simply whether the contract-labour threshold has been crossed.

It is which obligation is triggered by which threshold.

Women can work night shifts, but not without safeguards

The OSH Code permits women to work in all establishments and allows employment before 6 a.m. and after 7 p.m. with the woman's consent, subject to safety, holidays, working-hour and other conditions prescribed by the appropriate Government.

That does not create one identical night-shift checklist across India.

Employers still need to check the applicable Central or State conditions before putting women employees on night shifts.

For that reason, a national article should not hardcode highly specific items such as mandatory CCTV routes, a particular transport model or a universal consent format unless the relevant jurisdiction requires them.

Industrial relations thresholds matter mainly to larger industrial establishments

The Industrial Relations Code is not simply another payroll statute.

It becomes particularly important for industrial establishments dealing with standing orders, trade unions, retrenchment, lay-off, closure and industrial disputes.

Standing-order provisions apply to industrial establishments employing 300 or more workers.

Where several registered unions operate, the union with support of at least 51% of workers on the muster roll can become the recognised negotiating union. Where none reaches that level, the negotiating-council framework applies.

The Code also retains the right to strike but introduces a mandatory 14-day prior notice requirement.

Employers should avoid applying these industrial-relations concepts to every white-collar employee simply because the four labour codes are now in force. Definitions of worker, employee and industrial establishment still matter.

POSH remains a separate compliance pillar

The labour codes did not replace the Sexual Harassment of Women at Workplace Act, 2013.

Employers must continue maintaining POSH compliance separately. The Act remains in force.

Every employer must also register on the Ministry of Women and Child Development's SHe-Box portal (shebox.wcd.gov.in), record its Internal Committee there, and manage complaints and the related compliance forms through it.

Workplaces meeting the applicable 10-person threshold require an Internal Committee, with the prescribed composition and external member. Government guidance also recognises the 10-employee threshold for constitution of the Internal Committee.

The employer also needs a functional process for:

  • policy communication

  • employee sensitisation

  • receiving complaints

  • confidentiality

  • inquiry timelines

  • committee training

  • annual reporting

  • implementing recommendations

Payroll tax moved to the Income-tax Act, 2025

Salary paid from 1 April 2026 onward is governed by the Income-tax Act, 2025 for TDS purposes.

Salary TDS moved from Section 192 of the 1961 Act to Section 392(1) of the 2025 Act. Employers were required to reset salary-TDS computations from 1 April 2026 for Tax Year 2026-27.

The payroll forms also changed.

Old framework Tax Year 2026-27 framework
Form 12BB Form 124
Form 24Q Form 138
Form 16 Form 130

Form 124 is used by employees to provide claims and supporting evidence to the employer for salary-TDS computation.

Form 138 is the quarterly salary-TDS statement. Current due dates are 31 July, 31 October, 31 January and 31 May for the four respective quarters.

Form 130 becomes the annual salary TDS certificate for salary under the new Act, with the first such certificate for Tax Year 2026-27 due in June 2027.

Employers still dealing with FY 2025-26 corrections must remember that the old Act and old forms remain relevant to that earlier period.

The new tax regime is the payroll default, not the only regime

Payroll should ordinarily calculate salary TDS using the statutory default tax regime unless the employee makes the permitted choice for the old regime.

That does not mean HR can stop maintaining proof workflows completely.

Employees choosing the old regime can still have relevant HRA, LTA, housing-loan and deduction claims that need to be handled through the current Form 124 process where applicable.

A payroll system therefore needs two tax-regime paths rather than one simplified "new regime only" calculation.

DPDP compliance is important, but September 2026 is still a transition period

The Digital Personal Data Protection Act, 2023 and final DPDP Rules, 2025 are highly relevant to HR because employers process identity documents, bank details, attendance records, background-verification data, medical information and other personal data.

But the implementation is phased.

The Government brought selected provisions into force in November 2025 and established the Data Protection Board of India.

Most of the core operational provisions relating to processing, consent, Data Principal rights, security safeguards and breach-related duties are scheduled to commence 18 months after the November 2025 notification. The corresponding Rules 3 and 5 to 16 also have the same 18-month commencement period.

So as of September 2026, employers should be preparing their HR-data architecture for full DPDP compliance, but should not describe every final-rule obligation as already enforceable.

That preparation should include:

  • mapping employee personal data

  • identifying why each dataset is collected

  • reducing unnecessary collection

  • reviewing access permissions

  • setting retention schedules

  • documenting third-party processors and HR vendors

  • building correction and erasure workflows for when the relevant rights commence

  • preparing breach-response procedures

  • reviewing employee-facing privacy notices

Interactive tool

HR data compliance readiness checklist

Tick off what your HR team has done. The checklist is split by when each DPDP provision starts.

    0 of 0 done
    See how HR software handles employee data

    Ticks are saved only in this browser.

    General guidance, not legal advice.The stages follow the phased commencement described in this article. Dates are counted from the November 2025 notification, so confirm the exact dates and the provisions in each stage with your legal adviser.

    State-level compliance has not disappeared

    A Central labour-code implementation does not make payroll a purely Central exercise.

    Employers still need to map State-specific requirements including:

    • Professional Tax

    • Labour Welfare Fund

    • Shops and Establishments obligations

    • minimum-wage notifications

    • leave and holiday rules

    • working-hour and weekly-off requirements

    • night-shift conditions

    • establishment registrations

    • State rules issued under the labour codes

    These rules can differ materially even between offices belonging to the same company.

    Interactive tool

    State payroll compliance lookup

    Pick a State or Union Territory to see its professional tax, labour welfare fund, Shops and Establishments and minimum-wage position.

    A summary, not the State notification.This is a static summary last checked on 13 October 2026 against published compliance summaries, and some sources disagree. Rates and slabs change, and establishment type, headcount and employee category can change the answer. Confirm each figure with the current State notification before filing.

    A practical payroll compliance calendar

    A strong compliance process needs deadlines tied directly to payroll.

    Compliance Typical timing
    Monthly salary By statutory wage-payment deadline
    Separation wages Normally within two working days
    EPF/ECR Monthly
    ESI contribution Within 15 days after the contribution month
    Salary TDS deposit Monthly under applicable income-tax timetable
    Form 138 Quarterly
    Statutory bonus Normally within 8 months of accounting-year close
    POSH reporting Annual and event-driven requirements
    PT State-specific
    LWF State-specific
    Minimum-wage revision Check every applicable notification/VDA revision
    Labour-code registers Continuous
    Contractor compliance Monthly and before invoice release

    The actual calendar should be generated by State, establishment type and workforce profile rather than copied from one national spreadsheet.

    Interactive tool

    Statutory compliance calendar builder

    Choose your State and the compliance areas that apply to you to get the monthly, quarterly and annual deadlines.

    Today is
    Compliance areas
    A planning calendar, not a filing notice.The dates assume a 31 March accounting year and the usual statutory due dates. State PT and LWF dates, extensions and notifications can change them, so confirm the date before you pay or file.

    What should HR and payroll audit right now?

    A 2026 statutory audit should begin with the employee master rather than with old filing folders.

    Check whether every worker is attached to the correct establishment, State, wage category and statutory profile.

    Then reconcile salary components with the labour-code wage definition.

    Review employees newly affected by the ₹25,000 EPFO ceiling. Confirm ESI separately, on Code-defined wages. Identify fixed-term employees approaching one year. Test minimum wages. Review contractor compliance and principal-employer exposure. Check statutory bonus populations.

    For people operations, verify maternity policies, POSH committee structure, State working-condition rules and industrial-relations thresholds where relevant.

    For tax, verify that payroll has migrated to Section 392, Form 124 and Form 138 for Tax Year 2026-27.

    For HR data, prepare for the next DPDP commencement stages instead of waiting until those provisions become enforceable.

    The objective is not to have 20 separate compliance trackers.

    The objective is to make every statutory obligation traceable back to the employee, establishment, location, payroll period and responsible owner.

    What statutory compliance should look like in 2026

    The biggest mistake an employer can make now is treating compliance as a collection of annual forms.

    Modern compliance begins much earlier.

    The employee has to be classified correctly. The salary has to be structured correctly. The correct State and statutory profile must be assigned. Payroll then needs to calculate the correct wages, social-security contributions, deductions and tax. The payment has to happen on time. The registers and returns must reconcile with the payroll that produced them.

    That is also why HRMS and payroll systems matter more after the labour-code transition.

    The system needs to know which law applies before it can calculate the amount due.

    If compliance is still being reconstructed manually after payroll is processed, the organisation is already working backwards.

    Frequently asked questions

    01Are all four labour codes in force in 2026?

    Yes. The Government implemented the four labour codes with effect from 21 November 2025.

    02Does Basic salary have to be 50% of CTC?

    Not as a stand-alone rule, but 50% is the safest structure. The law adds back specified exclusions above 50% of the monthly remuneration into wages. Fixing Basic (with DA) at 50% of that remuneration means no add-back is ever triggered, so PF, gratuity and other wage-linked deductions stay constant every month. That is why QuikChex recommends it, even though the law does not fix Basic at exactly 50% of CTC.

    03Does full and final settlement have to be completed within two days?

    The Code on Wages requires wages payable on specified separations, including resignation, to ordinarily be paid within two working days. Other components such as gratuity, statutory bonus or leave-related payments must be checked under their own legal rules.

    04What is the current PF wage ceiling?

    ₹25,000 per month from 17 September 2026.

    05Has the ESI ceiling also increased to ₹25,000?

    No. The ESI ceiling remains ₹21,000 per month. Under the labour codes, though, ESI coverage and contribution are worked out on wages as defined in the Code (with the 50% inclusion rule), not on traditional gross salary.

    06Do fixed-term and contract employees have the same gratuity rule?

    No. A directly engaged fixed-term employee qualifies after one year under the contract. A contract worker engaged through a contractor is not automatically a fixed-term employee of the principal employer.

    07Is Form 16 still used in 2026?

    For FY 2025-26 under the Income-tax Act, 1961, yes.

    For salary governed by the Income-tax Act, 2025 from 1 April 2026, the annual salary TDS certificate is Form 130.

    08Is DPDP fully enforceable for employee data today?

    No. The Act and Rules have a phased commencement. Several institutional provisions are already effective, but most operational processing and Data Principal provisions are scheduled for the 18-month commencement stage following the November 2025 notification.

    09Did the labour codes replace POSH?

    No. POSH continues as a separate Central law and employers must maintain its compliance independently. Employers must also be registered on SHe-Box.


    We appreciate your interest! Our team will reach out to you soon.
    Or reach out to us now +91 98330 22174
    Book a Demo →